Europe unites to foster HPC technologies with the launch of ParMA, an ITEA 2 project to exploit fully the power of multi-core architectures
- ParMA will improve the performance of conventional High Performance Computing (HPC) applications
- ParMA will enable the advent of power-intensive innovative embedded applications
26, 2007 -
Leading European HPC players from France, Germany, Spain and the United Kingdom, announced today that they have joined forces to launch the ParMA (Parallel Programming for Multi-core Architectures) consortium. The key objective of the new consortium is to help the HPC community to benefit fully from the processor race while developing innovative, flexible and open technologies for taking full advantage of the multi-core architectures.
First analyze, refine and prioritize the genuine requirements
To fight against the limits of processors' clock speed, processor manufacturers are now delivering multi-core architectures - with today dual and quad core processors and dozens tomorrow - while most applications, mostly sequential, can only benefit from the power of a single core.
The challenge is now to enable the current and future applications to benefit fully from the new processor technologies by either restructuring existing applications or by facilitating the development of new applications that fully exploit the power of parallelism on these new architectures.
The ParMA project will start by analyzing, refining and prioritizing the genuine requirements of the industry. A first version of the ParMA technology will then be introduced at the end of the first project year to gain experience with a wide-range of applications. A second version of ParMA will be released at the end of the second year for further trials.
Powering up parallel processing for a large community
As parallel programming is becoming mainstream in the era of multi-core architectures, the project achievements will not only be relevant to software engineers who have already developed parallel HPC applications in the past and continue to port and optimize their codes on multi-core architectures: in many domains, parallel code will again be developed and, thus, can largely benefit from this project's achievements. Part of the ParMA software is open source and so available to a wide community.
The three essential goals are to enable:
1. Both the simulation of more complex processes and the modeling of more complex structures without increasing the execution time.
2. SMEs to acquire and run simulation applications that can be hosted on medium-sized systems when the power of multi-core processors is fully exploited.
3. The advent of innovative power-intensive embedded applications especially in industries - air & space for instance - which were "blocked" by the limits of the volume of the system, the power consumption, the heat dissipation, and the time constraints in communications.
About the ParMA project
The ParMA project is a 3-year ITEA 2 project, starting on June 2007 under the label #06015. It gathers European leaders in HPC technologies, including Research centers in Universities or Industries and Computing Centers, from France, Germany, Spain and the United Kingdom.
The 17 partners, across Europe, are a heavyweight group of ICT industry players: Allinea Software, Bull, CAPS-Entreprise, Commissariat à l'énergie atomique (CEA), Dassault Aviation (DA), Forschungszentrum Jülich (FZJ), Gesellschaft für Numerische Simulation (GNS), Gesellschaft für Wissens- und Technologietransfer der TU Dresden (GWT-TUD), Höchstleistungsrechenzentrum Stuttgart (HLRS, Universität Stuttgart), INDRA SISTEMAS, Institut National des Télécommunications (INT), MAGMA Gießereitechnologie, RECOM Services, ROBOTIKER , Universitat Autònoma de Barcelona (UAB), Université de Versailles Saint Quentin-en-Yvelines (UVSQ), Zentrum für Informationsdienste und Hochleistungsrechnen (ZIH, Technische Universität Dresden).
For more information on ParMA visit: http://www.parma-itea2.org
Jean-Marc Morel, Bull, France
ParMA project leader
About ITEA 2
ITEA 2 - Information Technology for European Advancement - is Europe's premier co operative R&D programme driving pre-competitive research on embedded and distributed software-intensive systems and services. As a EUREKA strategic Cluster, it supports co-ordinated national funding submissions and provides the link between those who provide finance, technology and software engineering.
ITEA 2-labelled projects are industry-driven initiatives building vital middleware and preparing standards to lay the foundations for the next generation of products, systems, appliances and services. ITEA 2 projects involve complementary R&D from at least two companies in two countries. The programme is open to partners from large industrial companies and small and medium-sized enterprises (SMEs) as well as public research institutes and universities.
The ITEA 2 founding partners - Airbus, Alcatel, Barco, Bosch, Bull, DaimlerChrysler, the European Federation of High Tech SMEs, Italtel, Nokia, Philips, Siemens, Telvent, Thales and Thomson - are all leaders in their respective fields and many figuring in the global top 100 companies.
For more press information on ITEA 2, please contact:
Kay Jeunhomme / Lara Jonkers
PR & Communications
ITEA 2 Office
Tel: +31 (0)40 247 5590 - Fax: +31 (0)40 247 5595
Email: email@example.com / firstname.lastname@example.org
About Bull, an Atos company
Bull is the trusted partner for enterprise data. The Group, which is firmly established in the Cloud and in Big Data, integrates and manages high-performance systems and end-to-end security solutions. Bull's offerings enable its customers to process all the data at their disposal, creating new types of demand. Bull converts data into value for organisations in a completely secure manner.
Bull currently employs around 9,200 people across more than 50 countries, with over 700 staff totally focused on R&D. In 2013, Bull recorded revenues of 1.3 billion.
For more information:
http://www.bull.com / http://www.facebook.com/BullGroup / http://twitter.com/bull_com
Atos SE (Societas Europaea) is a leader in digital services with 2013 pro forma annual revenue of 10 billion and 86,000 employees in 66 countries. Serving a global client base, the Group provides Consulting & Systems Integration services, Managed Services & BPO, Cloud operations, Big Data & Security solutions, as well as transactional services through Worldline, the European leader in the payments and transactional services industry. With its deep technology expertise and industry knowledge, the Group works with clients across different business sectors: Defence, Health, Manufacturing, Media & Utilities, Public Sector, Retail, Telecommunications and Transportation.
Atos is focused on business technology that powers progress and helps organizations to create their firm of the future. The Group is the Worldwide Information Technology Partner for the Olympic & Paralympic Games and is listed on the Euronext Paris market. Atos operates under the brands Atos, Atos Consulting, Atos Worldgrid, Bull, Canopy, and Worldline.
For more information, visit: atos.net